A slip resistance additive designed to be added to AQUAPRO 8068 Hitek and AQUAPRO 8270 Advance 2K to achieve an R10 (Oil-Wet Ramp Slip Resistance Rating).
A slip resistance additive designed to be added to Polycure's range of solvent based coatings to achieve an R10 (Oil-Wet Ramp Slip Resistance Rating).
A blend of solvents formulated for cleaning tools used in the application of polyurethane. It is suitable for cleaning DURAPOL Moisture Cure, POLYTHANE Two Pack Polyurethanes & CRYSTAPOL Low Yellowing coatings.
A blend of volatile solvents formulated to enhance the flow characteristics of Polycure polyurethane coatings. It is used when very high/low temperature and/or humidity and/or dry windy atmospheric conditions are present. Wet Edge Extender 3320 is also used where a large floor area is to be coated requiring maximum wet edge time.
A ready to use flow additive. When added into DURAPOL® Moisture Cure coatings, in the recommended ratio, this additive will minimise the rejection problems normally caused by wax, oils and other common household contaminants.
For us in AQUAPRO 8068 Hitek to improve chemical resistance and early abrasion resistance.
Speeds up the dry time of DURAPOL coatings.
Speeds up the dry time of NATUROIL coatings.