NATUROIL 3120 Tung Oil Sealer Low Sheen

• Overcomes the risk of edge bonding on tongue & groove
• Extremely durable
• Low sheen
• Excellent flow and levelling results in smooth finish
• Enhances the natural colour of the timber without appearing 'plastic'

Build : Low
Sandability : Very Good
Levelling & Flow : Excellent
Coverage : Basecoat - Timber: 10-12m2 per litre. Cork & Particleboard: 10-12m2 per litre. Subsequent Cotas: 10-12m2 per litre - coverage is dependent upon the porosity of the timber
Dry Time : Recoat: 16 hours. Hard Dry: Overnight. Full Cure: 5-7 days.
Clean Up : Clean all equipment using mineral turpentine
Packaging : 10L
Product Code : 1420-10

Data Sheet

Safety Data Sheets

Slip Certificate

Timber Floors What to Expect

Mirotone Warranty Information

Surface Prepartion:

Preparation: Preparing the floor to a professional standard is essential to achieve the best results. Fill all nail holes with a water based putty, allow to dry. Sand uncoated floor with 120-150 grade sandpaper or screenback on a flexible pad to ensure floor is uniformly dull with no sanding scratches, nibs or fur. Vacuum thoroughly. Take care to avoid scratching the surface.

Mixing: Stir thoroughly before use.

Tools: 6mm mohair roller and high quality brush.

Application:

1. Apply a liberal first coat of NATUROIL 3120 or FASTASEAL 3030 Sealer using a 6mm mohair roller and good quality brush to cut in. If using FASTASEAL allow to dry for 45 minutes before sanding, for all other coatings allow to dry overnight (min 16 hours).
2. Thoroughly sand floor with 150-180 grade sandpaper or screenback, remove all nibs, fluff and fur. Vacuum all dust.
3. Apply a second coat of NATUROIL 3120. Allow to dry (min 16 hours).
4. Thoroughly sand floor with 150-180 grade sandpaper or screenback, remove all nibs, fluff and fur. Vacuum all dust.
5. Apply the final coat of NATUROIL 3120 Tung Oil.

Interior use only. Timber, particleboard, cork flooring and sports floors.