Call Us:1-300-132-202

NATUROIL 3100 Gloss

NATUROIL 3100 is a single pack, clear, gloss, oil based floor coating, which will enhance and protect the natural appearance of interior timber and parquetry floors. As it is oil based, it will minimise the risk of edge bonding (gluing) on tongue and groove timber floors and is recommended where the stability of the timber floor cannot be guaranteed. NATUROIL is easy to apply and is ideally suited for application in domestic situations.

  • Overcomes the risk of edge bonding on tongue & groove
  • Enhances the natural look of timber
  • Gloss finish
  • Excellent flow and levelling results in smooth finish
  • Enhanced the natural colour of the timber without appearing ‘plastic’
Finish
Full Gloss
Build
Medium
Sandability
Very Good
Levelling & Flow
Excellent
Coverage
Timber: 6-8m2 per litre Cork & Particleboard: 5-7m2 per litre - coverage is dependent upon the porosity of the timber
Dry Time
Recoat: 16 hours Hard Dry: Overnight Full Cure: 5-7 days
Clean Up
Polycure Super Cleaning Solvent 3300
Packaging
10L
Product Code
1400-9-10
  1. Apply a liberal first coat of NATUROIL 3100 or FASTASEAL 3030, 3540 Sealer using a 6mm mohair roller and good quality brush to cut in. If using FASTASEAL allow to dry for 45 minutes before sanding, for all other coatings allow to dry overnight (min 16 hours).
  2. Thoroughly sand floor with 150-180 grade sandpaper or screenback, remove all nibs, fluff and fur. Vacuum all dust.
  3. Apply a second coat of NATUROIL 3100. Allow to dry (min 16 hours).
  4. Thoroughly sand floor with 150-180 grade sandpaper or screenback, remove all nibs, fluff and fur. Vacuum all dust.
  5. Apply the final coat of NATUROIL 3100 Gloss.
  • Interior use only. Timber, particleboard, cork flooring and sports floors.
NATUROIL 3100 Oil Modified Gloss Dry Slip Oil Wet Ramp