DURASTAIN 2025 Dye Stain

Code: 2025

A solvent based dye satin designed to be applied directly over raw timber to enhance the natural appearance of the timber. Available in 8 bright vibrant colours which can be blended to promote an unlimited colour range.

Features

Features

  • Versatile - Can be applied over all species of timber
  • Medium to slow dry, easy to apply - results in a uniform colour
  • Apply by brush, wiping, roller or applicator - no need to wipe off
  • Suitable for toning - can be added onto DURAPOL, POLYTHANE or TITAN Gloss coatings to provide a deeper tone colour

 

DURASTAIN 2025 Colour Stain Chart

Specifications

Specifications

Colour : Primary: #5000 Yellow, #7000 Red, #8000 Blue, #9999 Black. Premixed: #6001 Maple, #6004 Oak, #6007 Teak, #6008 Walnut
Thinner : AQUAPRO 1320 Slow or 133 Medium Reducer
Coverage : 10-12m2 per litre - coverage is dependent upon the porosity of the timber
Dry Time :
Refer to datasheet
Clean Up :
Water or Polycure Super Cleaning Solvent
Packaging : 1 & 5L
Product Code : 2025

Tech Data Sheet

Application

Application

Surface Prepartion:

Preparation: Prepare a test area to check colour and application. Prepare the surface by filling nail holes and imperfections with a water based putty in a colour close to the stain. Allow to dry. Sand floor per AS 4786.2-2005 standard to produce a defect and scratch free surface. Finish sanding with 120-180 screen back paper fitted to a rotary sanding machine. Ensure floor is defect and scratch free before applying the stain. Scratches and imperfections may be highlighted by the stain.

Mixing: Stir thoroughly before use.

Tools: Brush, rag, roller or applicator - wipe on and leave or wipe on wipe off.

Application:

  1. Reduce and mix enough stain for the entire project before starting. Work from one corner as you would when coating a room. Apply to strip flooring along the direction of the grain. Only cut in a small distance in front of your roller or pad applicator. DO NOT pour or pool stain on the floor.
  2. Parquetry – apply the stain in an even application across the narrowest part of the floor from side to side until the whole area is stained. • Even application of the stain is essential to ensure a uniform even colour.
  3. Allow the stain to dry before applying coatings (see recoat time).
  4. Ensure adequate coating is applied to seal DURASTAIN 2025 Stain to reduce the risk of sanding through the sealer coat. If this happens, it is possible to reapply the stain to these areas to re-colour the exposed timber.

Where to Use

Where to Use

Interior use only. Timber floors, architraves, skirting boards, timber quadrant and beading.

To top