DURAPOL 1012 Semi Gloss

Specifications
Surface Preparation
Application
Where to Use
Additional Information

Finish

Semi-Gloss

Build

Medium

Solvent Resistance

Excellent

Water Resistance

Excellent

Levelling & Flow

Excellent

Coverage

10-20m2 per litre - coverage is dependent upon thr porosity of the timber

Dry Time

Hard Dry: Overnight Full Cure: 5-7 days - refer to datasheet

Clean Up

Polycure Super Cleaning Solvent 3300

Packaging

10L

Product Code

5845-6-10

Preparation

Preparing the floor to a professional standard is essential to achieve the best results. Fill all nail holes with a water based putty, allow to dry. Sand uncoated floor with 120-150 grade sandpaper or screenback on a flexible pad to ensure floor is uniformly dull with no sanding scratches, nibs or fur. Vacuum thoroughly. Take care to avoid scratching the surface.

Mixing

Stir thoroughly before use.

Tools

6mm nap roller or applicator and a high quality brush.

Timber Floor - Apply a liberal first coat of DURAPOL 1044 or 1045, Titan Gloss, POLYTHANE 2043 or FASTASEAL 3030, 3535 or 3540 Sealer using a 6mm mohair roller and good quality brush to cut in. If using FASTASEAL allow to dry for 45 minutes before sanding, for all other coatings allow to dry overnight (min 8 hours to max 24 hours).
Apply a second coat of DURAPOL 1044 or 1045 Gloss, Titan Gloss or POLYTHANE 2043. Allow to dry overnight (min 8 hours to max 24 hours).
Thoroughly sand floor with 150-180 grade sandpaper or screenback, remove all nibs, fluff and fur. Vacuum all dust.
Apply the final coat of DURAPOL 1012 Semi-Gloss.

Interior use only. Timber, particleboard and cork flooring

DURAPOL 1012 Semi-Gloss Dry Slip Oil Wet Ramp