Call Us:1-300-132-202

AQUAPRO 8210 UltiMATTE 2K Water Based Floor Finish

AQUAPRO 8210 UltiMATTE 2K Water Based Floor Finish is a high performance, two pack, water based, low gloss floor finish that has exceptional abrasion resistance and chemical resistance and is ideal for commercial and high traffic environments where a low gloss, “raw uncoated” finish is required.

  • Easy to apply
  • Very low gloss, uncoated finish look
  • Excellent abrasion resistance
  • Excellent chemical resistance
  • Fast drying
  • Low VOC
Colour
Clear
Finish
Matt
Build
Good
Sandability
Good
Solvent Resistance
Excellent
Water Resistance
Excellent
Levelling & Flow
Excellent
Coverage
12-15m2 per litre - coverage is dependent upon the porosity of the timber
Dry Time
Recoat: 3-4 hours Walk in Socks: 4-6 hours Light Traffic: After 24 hours - refer to datasheet
Clean Up
Water
Packaging
5L
Product Code
8210-0A - Part B Hardener 8770-B
  1. To ensure the most uniform finish on timbers such as Radiata, Cypress and Kauri pine, Polycure recommends the use of FASTASEAL 3030 Clear Sealer as the first coat on raw timber. For further information, contact Polycure Technical.
  2. To achieve an uncoated raw appearance: Apply a liberal first coat of AQUAPRO 8210 UltiMatte (as a Sealer coat) directly to the raw flooring using a 10mm nap roller cover and good quality brush to cut in around skirting boards and edges. Allow to dry per datasheet.
  3. For Tannin Prone or Problem Timbers: Polycure recommends the use of FASTASEAL 3535 to reduce the risk of tannin bleed. Note: The application of FASTASEAL 3535 as the first coat on raw timber will enhance the Natural colour of the timber, providing a deeper rich colour to the floor.
  4. Thoroughly sand floor with 180 grade sandpaper or screenback, remove all nibs, fluff and fur. Vacuum all dust. Take care to avoid scratching the surface.
  5. Apply a second coat of AQUAPRO 8210 UltiMATTE. Allow to for 3 to 4 hours
  6. Apply the final coat of AQUAPRO 8210 UltiMATTE. Polycure recommends to achieve maximum protection and life out of your coated floor that a standard 3 coat system is applied.
  • Interior use only. Timber particleboard and cork flooring.
AQUAPRO 8210 UltiMATTE 2K Water Based Floor Finish