A slip resistance additive designed to be added to AQUAPRO 8068 Hitek and AQUAPRO 8270 Advance 2K to achieve an R10 (Oil Wet Ramp Slip Resistance Rating).

Designed for use on large floors or in hot conditions that require overnight dry.

Designed for use on small areas where a faster drying system is required or in cooler conditions.

Designed to be used in small areas where a faster drying time is required or in cooler conditions. Use in conjunction with AQUAPRO 2120 Water Based Dye Stain.

Extends the open time of Polycure polyurethane coatings in very high/low temperature and/or humidity and/or dry windy atmospheric conditions are present.

Formulated for use in DURAPOL coatings.

A blend of solvents formulated for cleaning tools used in the application of polyurethane. It is suitable for cleaning DURAPOL Moisture Cure and POLYTHANE Two Pack Polyurethanes coatings.

A slip resistance additive designed to be added to Polycure’s range of solvent based coatings to achieve an R10 (Oil-Wet Ramp Slip Resistance Rating).

A ready to use flow additive. When added into DURAPOL® Moisture Cure coatings, in the recommended ratio, this additive will minimise the rejection problems normally caused by wax, oils and other common household contaminants.

Speeds up the dry time of DURAPOL coatings.