Applying AQUAPRO 2770 Pigment Stain is as easy as 1,2,3 - POLYCURE
June 10, 2020
By : Polycure
AQUAPRO 2770 Pigment Stain is a versatile, water based, easy to apply pigmented stain that has been specifically designed to provide timber flooring with a colour washed effect. Applying the stain couldn’t be simpler. Simply:
Prepare the floor surface as per labels and datasheet instructions. Fine sand the floor to a dull, defect and scratch free surface. Vacuum the floor.
Reduce and mix enough AQUAPRO 2770 Pigment Stain. Using a flat pad applicator, rag and brush (to cut in & stain small areas) apply enough stain while removing excess stain by rag. Remember to only cut a small distance in front of your applicator.
Allow the stain to dry as per label and datasheet directions. Once the stain is thoroughly dried apply your choice of sealer and topcoat below.
For more information always refer to the product safety data sheet and label. Application variables affect product performance therefore this information should be used as a guide. The user must satisfy themselves as to the suitability of this product for their requirements. Mirotone assumes no liability for use of this information.