Surface Prepartion:
Preparation: Preparing the floor to a professional standard is essential to achieve the best results. Fill all nail holes with a water based putty, allow to dry. Sand uncoated floor with 120-150 grade sandpaper or screenback on a flexible pad to ensure floor is uniformly dull with no sanding scratches, nibs or fur. Vacuum thoroughly. Take care to avoid scratching the surface.
Mixing: Stir thoroughly before use.
Tools: 6-10mm nap roller or water based applicator and a high quality brush.
Application:
- Sand uncoated floor with 120-150 grade sandpaper or screenback on a flexible pad to ensure floor is uniformly dull with no sanding scratches, nibs or fur. Vacuum thoroughly. Take care to avoid scratching the surface.
- Apply a liberal first coat of AQUAPRO 8020 Sealer using a 6mm or 10mm nap roller cover and good quality brush to cut in around skirting boards and edges. Allow to dry for 1 to 2 hours.
- Thoroughly sand floor with 180 grade sandpaper or screenback, remove all nibs, fluff and fur. Vacuum all dust. Take care to avoid scratching the surface.
- Apply a coat of AQUAPRO 8068 Hitek or AQUAPRO 8270 Advance 2K. Allow to for 1 to 2 hours. If required, lightly sand floor with 180 grade sandpaper or screenback. Vacuum all dust.
- Apply the final coat of AQUAPRO 8068 Hitek or AQUAPRO 8270 Advance 2K.