|
| Viewing & Printing Data Sheets |
Summary Data Sheet
If you are not "Logged In" you will only be able to view and print the Summary Data Sheet for this product (information linked to the "Brown Quick Links" below).
Full Version Data Sheet
In order to view and print the Full version of this Data Sheet (including the information linked to the "Blue Quick Links" below) you must "Log In".
If you do not have "Log In" details please click "Apply for Log In". | 
| |
|
|
|
|
|
| Product Description |
| Wet Edge Extender 3320 is a blend of volatile solvents specifically formulated for use in Polycure polyurethane coatings. It is used to enhance the flow characteristics of polyurethane under conditions of very high temperature and/or humidity and/or dry windy atmosphere or very low temperature. It is also for use on large floor areas requiring maximum wet edge time. Wet Edge Extender 3320 is suitable for use in Polycure single pack moisture curing (DURAPOL®), two pack polyurethanes (POLYTHANE®) and non yellowing (CRYSTAPOL®) finishes. | |
|
|
| Mirotone/Polycure Accreditations |
Research Laboratory: Mirotone's head office research laboratory in Sydney, Australia holds N.A.T.A. accreditation No. 865 under ISO/IEC 17025:1999 General Requirements for the Competence of Testing and Calibration Laboratories.
N.A.T.A. - National Association of Testing Authorities
Mirotone is N.A.T.A. certified to AS/NZS ISO 9001:2008 Quality management systems. | |
|
|
| Mixed System Policy |
|
A Mixed System is:
Where any coating or additive manufactured by another coating manufacturer is applied under, between, in, or on top of, coatings manufactured by Mirotone. [Additives may include thinners, retarding solvents, hardeners, flow additives, stains or catalysts]; or
Where products manufactured or supplied by Mirotone are used in a manner not approved or recommended by Mirotone on its labels or Data Sheets.
Policy: Mirotone will not recognise any warranty claim from customers or third parties if any Mirotone product has been used in a Mixed System with other manufacturers' products or additives. Mirotone can only warrant the quality of its own range of coatings when used in strict accordance with the recommended coating systems thinners and additives stated on Mirotone's labels and Data Sheets. | |
|
|
| Limitation of Liability |
This Data Sheet is based on information in Mirotone's possession at the "Date of Issue" above. Later experience may lead to amendments. Users should check with Mirotone to ensure that this Data Sheet is still current.
The information contained in this Data Sheet is based on data appraised in our Laboratories and on our own research, and that of others whose work we believe is reliable. Due to possible differences between controlled laboratory test conditions and methods, and actual application conditions and methods, coupled with possible differences in interpretation of results, the user of this product must satisfy himself that the end result obtainable under his particular application conditions meets his requirements. Special attention is directed to the problem of chemical compatability, as Mirotone can control only the quality and formulation of its own materials. Mirotone has no control over quality, formulation or consistency of other manufacturers' products or the substrate to which its product is applied. Therefore Mirotone supplies its products only on condition that the consumer himself is satisfied as to the performance of the product in meeting his particular requirements. | |
|
|